Kidde RF-SM-DC User Guide Uživatelský manuál

Battery powered, wireless Smoke Alarm with SMART HUSH®Control totemporarily silence nuisance alarms.Thank you for purchasing a Kidde Wireless Intercon

LED Indicator OperationRed LED:The red LED will flash in conjunction with the alarm beep. Therefore, the redLED will flash during a smoke alarm, a low

breaker supplying power to the alarm circuit. If the alarms still does not sound,see the trouble-shooting guide in section 12. DO NOT use an open flam

the label. The date written on the label should be after ten (10) years of cumu-lative power. NOTE: Chirping once a minute is an indication of a low

chamber) by using compressed air or a vacuum cleaner hose around the perime-ter of the alarm. The outside of the alarm can be wiped with a damp cloth.

• The use of alcohol or drugs may also impair one’s ability to hear the smokealarm. For maximum protection, a smoke alarm should be installed in eachs

• In leaving, don’t open any inside door without first feeling its surface. If hot, orif you see smoke seeping through cracks, don’t open that door! I

Smoke Detection - Are More Smoke Alarms Desirable? The required number ofsmoke alarms might not provide reliable early warning protection for thoseare

12. TROUBLE SHOOTING GUIDE13. SERVICE AND WARRANTYIf after reviewing this user’s guide you feel that your smoke alarm is defective inany way, do not t

approval from Kidde. Doing so will void the user’s authority to operate thisequipment.This device complies with Part 15 of the FCC Rules. Operation is

TEN YEAR LIMITED WARRANTYKIDDE warrants to the original purchaser that the enclosed smoke alarm (but not thebattery) will be free from defects in mate

Wireless, Battery-Powered, Single and/or Multiple Station (24 devices maximum,see section 3) Ionization Smoke Alarm with Smart HUSH®Control to tempora

1. RECOMMENDED LOCATIONS FOR ALARMS• Locate the first alarm in the immediate area of the bedrooms. Try to monitorthe exit path as the bedrooms are usu

MOBILE HOME INSTALLATIONModern mobile homes have been designed and built to be energy efficient.Install smoke alarms as recommended above, refer to RE

• In an area where the temperature may fall below 40ºF or rise above 100ºF,such as garages and unfinished attics.• In dusty areas. Dust particles may

4. Using a pen or pencil, change the switches in each of the Kidde Wirelessdevices to match the pattern you selected in step 3. Ensure that thesequenc

Install the three (3) AA batteries in the back of the alarm.• The mounting plate must be removed from the back of the unit to installbatteries. To rem

3. Hold the mounting plate against the selected installation location (wall orceiling) and mark the center of the holes with a pencil. To ensure aesth

4. OPERATION AND TESTINGOPERATIONThe smoke alarm is operating once fresh batteries are installed and testing iscomplete. When the smoke alarm ionizati